NRP1002/P IP Phone User Manual
www.newrocktech.com 39/68
Figure 66 - Web Call, Entering Number and Select Line
8.3 SYSTEM / Information
User can get the system information of the device in this page including.
Model
Hardware Version
Software Version
Uptime
Last uptime
MEMInfo
And also summarization of network status,
Network Mode
MAC
IP
Subnet Mask
Default Gateway
Besides, summarization of SIP account status,
SIP User
SIP account status (Registered / Unapplied / Trying / Timeout)
8.4 SYSTEM / Account
User may change his/her web authentication password in this page.
For users with Administrators privilege, the user can also manage user accounts by adding or deleting user
account and assigning privilege and password to new account.
There are two types of user privilege, Administrators and Users. If a user account is created as Users
privilege, this account will have limited accessibility to the device and cannot change some device settings.
The user account can be used to operate the device or access the device web portal by login to the device or
its web. User should log in to device web portal with his/her username and web password.
NOTICE! The device is shipped with a default Administrators user account.
The username and
password for the default account
is ‘admin’
which has been printed on the brand and model label, at
the bottom side of the device.
8.5 SYSTEM / Configurations
Users with administrator privilege can export or import the device configuration in this page and reset the
device to factory default.