New Leader NL450C, Руководство оператора

Страница: 45 / 142

- 45 -
NL450C
www.NewLeader.com
(800) 363-1771 307306-AA-D
Header
12” (30cm)
MAX TRAVEL
Figure 5 - Walking Beam Travel
Rear Pulling Lugs
NOTICE!
Do not pull implement sideways—always pull straight. Always disconnect tractor from implement
before using rear lugs. Otherwise, damage to implement may occur.
NOTICE!
Failure to raise jack before pulling stuck implement will destroy jack.
If implement becomes stuck in fi eld and cannot be
freed by towing through:
1. Empty spreader, shut off tractor power and
lower jack.
2. Disconnect implement from tractor.
3. Hook appropriately rated chain to both the left
and right hand rear pulling lugs as shown in
Figure 5.
4. Fasten chains to tractor.
5. Raise jack.
6. Engage tractor to dislodge implement.
NOTE: SPREADER NOT SHOWN FOR CLARITY
Figure 6 - Rear Pulling Lugs
General Operating Procedures