manualshive.com logo in svg

New Leader NL450C, Руководство оператора

Поделиться
Скачать
New Leader NL450C Скачать руководство пользователя страница 109

- 109 -

NL450C

www.NewLeader.com
(800) 363-1771

307306-AA-D

Header

Feedgate Optimizer

NOTE:

This program will help to determine the ideal gate position for each speci

fi

 c application, based on 

speed, swath width, density, and application rate.

1.  Power up Display Monitor and activate VT.

•  The Run screen will appear.   Select appropriate 

bin button at bottom of screen. Press 

 to 

continue.

•  The Bin Events screen will appear.  Press 

 to continue.

2.  Enter average speed and target rate:

•  The Feedgate Optimizer screen will appear.  

Using keypads, enter Average Speed and Target 

Rate into appropriate 

fi

 elds for each bin.

3.  Accept recommended settings:

• Recommended feedgate opening will be 

displayed along with minimum and maximum 

rates. If 

 is selected, new feedgate setting will 

save and automatically move to proper height. 

If 

 is selected, new settings are ignored and 

system settings are kept.

Controller Operations

Содержание NL450C















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды