background image

                  

P l e a s e   G i v e   P a r t   N o . ,   D e s c r i p t i o n   a n d   U n i t   S e r i a l   N o .

HIGHWAY EQUIPMENT COMPANY

5

97373-A

Page Rev. A

PREFACE

PLEASE !   ALWAYS THINK SAFETY FIRST !!

The purpose of this manual is to familiarize the person (or persons) using this unit with the information
necessary to properly install, operate, and maintain this system.  These instructions cannot replace the
following: the fundamental knowledge that must be possessed by the installer or operator, the knowledge of
a qualified person, or the clear thinking necessary to install and operate this equipment.  Since the life of any
machine depends largely upon the care it is given, we suggest that this manual be read thoroughly and
referred to frequently.  If for any reason you do not understand the instructions, please call your authorized
dealer or our Cedar Rapids, Iowa, Product Support Department at (319) 363-8281.

It has been our experience that by following these installation instructions, and by observing the operation of
the spreader, you will have sufficient understanding of the machine enabling you to troubleshoot and correct
all normal problems that you may encounter.  Again, we urge you to call your authorized dealer or our Cedar
Rapids Product Support Department if you find the unit is not operating properly, or if you are having trouble
with repairs, installation, or removal of this machine.

We urge you to protect your investment by using genuine HECO parts and our authorized dealers for all
work other than routine care and adjustments.

Highway Equipment Company reserves the right to make alterations or modifications to this equipment at
any time.  The manufacturer shall not be obligated to make such changes to machines already in the field.

This Safety Section should be read thoroughly and referred to frequently.

ACCIDENTS  HURT !!!

ACCIDENTS  COST !!!

ACCIDENTS CAN BE AVOIDED !!!

Содержание L2020G4





















































































































Отзывы: