New Leader Hi-Way XT3 TYPE II, Руководство оператора

Страница: 37 / 100

- 37 -
XT3 TYPE II
www.NewLeader.com
(800) 363-1771 316535-AA-A
Header
Lubrication
DANGER
When conveyor is running, stay out of body. Stay clear of all moving parts. Entanglement
of clothes, any part of your body or anything in your hands can cause serious injury. Do
not use a bar, rod or hammer on conveyor while it is moving—if it gets caught it could
cause injury. With spinner shut down and conveyor running slowly, spray oil mixture
between links of chain by spraying through openings at the rear end of sill or from front
outside body when access clearance is adequate. Do this at least once a week and after
each time the unit is washed. Allow to dry before lubricating.
Lubricate the conveyor chain at least once a week. Fill the oiler reservoir daily with a mixture of 75% diesel
fuel and 25% SAE 10 oil. Before each fi lling of the dump body with material to be spread, open petcock
and run the conveyor until the full length of chain has been oiled, then shut petcock.
If unit is not equipped with a chain oiler, Use a mixture of 75% diesel fuel and 25% SAE 10 oil in a pressurized
hand spray gun.
Lubrication & Maintenance