NEW KON 10 Series Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 17

NEW KON 10 Series Скачать руководство пользователя страница 16

16

11. Cleaning and Maintenance

1. Please check & empty the paper waste storage container prior to/during operation or on a regular schedule.
2. If you would like to clean the cover of the product, please wipe it with a clean, soft dry cloth.

Lubricating points

※

Periodically

lubricate parts with a light machine oil where indicated by the arrows

※ L

ubrication on both sides (left and right)

DIE BLOCK SCHEDULED MAINTENANCE& USAGE RECOMMENDATIONS

1. Lubricate parts indicated by the arrows periodically (recommend once per month during heavy use periods)

2. When selecting numbers or characters, please be sure to position the desired character on the correct wheel
    stop/alignment position before activating the machine.
    Model 905 Pin Selector Die…when selecting the desired number or character, please be sure to insert the
    wheel selector pin into the die block

firmly and in proper alignment

.

Model 905L Lever Selector Die…when selecting the desired number or character, please be sure that the
position is in the

correct wheel stop/alignment position

.

If the selected number or character is not in the correct position and the machine is activated, it is possible
that the needles, wheels and/or die plate

may sustain damage

.

3. According to the frequency of use, please clean paper waste materials from the die block periodically.
4. Please check the paper waste storage regularly and discard the paper chips before the container is full.
    If you use the machine continuously and do not discard the paper waste regularly, it will be difficult
    to remove the paper waste storage container. If waste storage clearance is neglected, it may also cause the
    die block needles to sustain damage.

PARTS LIST

1. V-Belt

....

replace as needed due to long term usage or if the perforator has been frequently overloaded.

2. Needles

...

replace as needed due to long term usage or not following correct procedures as noted above.

3. Die plate

..

replace as needed due to long term usage or not following correct procedures as noted above.

4. Wheels

...

replace as needed due to long term usage or misalignment of selected numbers or characters.

J.Snell & Co., Inc.

415.206.7700

156 Mendell Street

www.perforatorsplus.com

San Francisco, CA 94124

[email protected]

ADG04182018 V3.

«
...
14
15
16
17
»

Содержание 10 Series


















Отзывы:

Нет отзывов