New Holland Workmaster 50, Руководство оператора, Страница: 73 / 184

4 - OPERATING INSTRUCTIONS
4 - OPERATING INSTRUCTIONS ###_4_###
STARTING THE UNIT
Starting the tractor
DANGER
Run-over hazard!
Start engine only from operator’s seat. If you
bypass the safety start switch, the engine can
start with the transmission in gear and the ma-
chine will move. DO NOT short or connect
across terminals of the starter solenoid.
Failure to comply will result in death or seri-
ous injury.
D0102A
To start the engine:
1. Step onto the tractor from left-hand side only.
2. Sit on the operator’s seat and fasten seat belt.
3. Make sure that both gear-shift levers and shuttle lever
are in neutral.
NOTICE: Neutral start switch prevents operation of the
starting motor unless the gear levers are in the neutral
position.
4. Make sure the Power Take-Off (PTO) is disengaged.
5. Depress the clutch pedal.
NOTICE: Clutch switch prevents operation of the start-
ing motor unless the clutch pedal is depressed.
6. Turn the key switch to the start position. Release the
key when the engine starts.
NOTICE: Never push or tow the tractor to start the engine.
Doing so may overstress the drive train.
A three-position key-start switch is installed. The key-start
switch positions are as follows:
Position 1 Electrical equipment Off.
Position 2 Accessories on (head
lamp, Instrument cluster,
horn and gauges, brake
lights, turn signals) engine
'ON'.
Position 3 Engine Start -- The full
clockwise position activates
the starter motor, to start
the engine. Once the key
is released, the switch
returns to Position 2.
GNIL14TR00558AA
1
4-1