New Holland W270C Tier 4, Руководство по обслуживанию

Страница: 29 / 61

Engine - Engine and crankcase
Engine - Remove – Engine
NOTE: Put caps on the fittings and plugs in the hoses to
prevent foreign material from entering the system when dis-
connecting fuel lines or hydraulic hoses.
1. Park the machine on a level surface and lower the
bucket to the ground. Put the articulation lock
(1) in
the LOCKED position.
2. Key in the RUN position, engine Off, place the pilot
control switch in the normal OPERATION position.
3. Move the loader hydraulic control handle to the raise
and lower position in order to release any hydraulic
pressure in the lift circuit.
4. Move the loader control handle in and out of the tilt
position several times, this will relieve any pressure
in the pilot accumulator.
5. Release the pressure in the ride control accumulator
with the bleeder valve in the ride control valve.
6. Depress the brake pedal several times to discharge
brake accumulators.
7. Slowly loosen the filler cap on the hydraulic oil tank
to release air pressure.
LELI12WL30005AB
1
8. Put the master disconnect switch (1) in the “OFF”
position.
9. Drain the engine radiator coolant.
10. Drain the engine oil.
LELI12WL30006AB
2
11. Loosen the hose clamp (1) on the air box snorkel
under the air inlet hood.
LELI12WL30007AB
3
84547255C 15/03/2013
10.1 [10.001] / 6