SECTION 10 - ENGINE - CHAPTER 1
10-25
ROCKER ASSEMBLY
Removal
1. Loosen and remove nuts, lock washers, and flat
washers from the rocker pillar stud, 1. Lift the
rocker assembly, 2.
2. Remove the push rods, 3, and valve stem caps,
4.
21
CYLINDER HEAD
Removal
Loosen the cylinder head bolts, starting from the
center, in a circular pattern, using several steps of
equal torque. Remove the head.
22
TAPPETS
Removal
Pull the tappets from the machined bore in the
cylinder block.
23
