SECTION 10 - ENGINE - CHAPTER 1
10-21
7. Loosen and remove the drain plug, 1, from the
power steering reservoir, 2, and drain into a
suitable container.
NOTE:
See separating the tractor at the transmis-
sion in Section 21 to separate the tractor.
10032804
1
2
9
8. After the tractor has been successfully sepa-
rated, support the front axle and the front support
frame with jack stands.
9. Remove the firewall from the engine.
10. Remove the muffler and exhaust pipe from the
tractor.
11. With the chain and hoist still attached to the
engine, remove the mount bolts, 1, from each
side of the frame rails.
12. Carefully remove the engine.
20002365
1
1
10
Installation
1. Attach a hoist to the engine, and position it onto
the frame.
2. Install the engine mounting bolts on both sides of
the frame. Apply Loctite
®
thread locker 242 to the
thread of the bolts. TIghten bolts to the following
torques:
torques #1 -- 80 N
⋅
m (60 ft. lbs.)
torques #2 -- 80 N
⋅
m (60 ft. lbs.)
torques #3 -- 175 N
⋅
m (130 ft. lbs.)
3. Install the muffler and exhaust pipe onto the
tractor.
4. Install the firewall onto the engine.
NOTE:
See section 21 for attaching the engine to the
transmission.
20034413
3
1
2
11
