New Holland MH2.6, Руководство по ремонту

Страница: 21 / 41

6 SECTION 02 - SAFETY PRECAUTIONS
STOP
When the machine is to be stopped for whatever
reason, always check that all controls are in the neu-
tral position and that the safety lever is on the lock
position to guarantee risk-free start-up.
Never leave the machine unattended with the en-
gine running.
Before leaving the driver’s seat and after ensuring
no-one is near the machine, slowly lower the attach-
ment until it rests safely onto the ground. Move pos-
sible additional tools in the safe retracted position.
Check that all controls are in the neutral position.
Move engine controls to the shut-down position.
Switch off the key-start switch. Consult the Opera-
tion and Maintenance Instruction Manual.
Park the machine in a non-operating and no-traffic
area. Park on firm level ground. If this is not possi-
ble, position the machine at a right angle to the
slope, making sure there is no danger of uncon-
trolled sliding.
If parking in traffic lanes cannot be avoided, provide
prescribed danger signals such as: flags, barriers,
flares and other signals. Moreover arrange further
danger signals on traffic lane so as to adequately
warn the oncoming drivers.
Always switch off the key-start switch before clean-
ing, repairing or servicing, or parking the machine to
prevent accidental unauthorised start-up.
Never lower the attachment or auxiliary tools other
than from sitting in the operator’s seat. Sound horn.
Make sure that nobody is within the machine oper-
ating range. Lower the attachment slowly.
Securely block and lock the machine every time you
leave it unattended. Return keys to the safe place
previously agreed upon.
Perform all necessary operations for stopping as de-
tailed in the Operation and Maintenance Instruction
Manual.
Drive the machine far from pits, trenches, rocky
hanging walls, areas with overhead electric lines,
and slopes before stopping it at the end of the work-
ing day.
Align the upper structure to the tracks in order to al-
low to easily get on and off the driver’s compart-
ment.
Move all controls to the position specified for ma-
chine stopping. Refer the Operation and Mainte-
nance Instruction Manual.
Never park on an incline without accurately blocking
the machine to prevent unexpected movement.
Always follow stopping instructions contained in the
Operation and Maintenance Instruction Manual.
MAINTENANCE
General notes
Carefully read the Operation and Maintenance In-
struction Manual before starting, operating, main-
taining, fuelling or servicing the machine in any
manner.
Read all safety plates mounted on the machine and
observe instructions they contain before starting,
operating, repairing, fuelling or servicing the ma-
chine.
Do not allow unauthorised personnel to operate or
service this machine.
Do not carry out any work on the attachment without
prior authorisation.
Observe recommended maintenance and repair
procedures.
Do not wear rings, wrist watches, jewellery, loose or
hanging garments, such as ties, torn clothing,
scarves, unbuttoned or unzipped jackets that can
get caught in moving parts. Wear certified safety
clothes such as: hard hat, no-slip footwear, heavy
gloves, ear protection, safety glasses, reflector
vests, respirators when required.
Ask your employer about safety regulations in force
and protective equipment.
Do not use controls or hoses as hand holds. Hoses
and controls are movable parts and do not provide
solid support.
Besides, controls may be inadvertently moved and
cause unexpected movement of the machine or its
attachments. Do not jump on or off the machine. Al-
ways keep both hands and one foot, or both feet and
one hand in contact with steps and/or grab rails.
Never service the machine with someone sitting in
the driver’s seat, unless this person is an authorised
operator assisting in the maintenance being carried
out.