New Holland F156.6, Руководство по обслуживанию, Страница: 38 / 41

0 - 30 87726937A Edition 12/2007
REPAIR INSTRUCTIONS F106.6 / F106.6A
SAFETY INSTRUCTIONS F156.6 / F156.6A
BEFORE WORKING ON THE ELECTRICAL
SYSTEM
Before working on the electrical system, when there
is a possibility of tools, spare parts, etc. touching
electric wires and contacts, disconnect the battery:
•
disconnect the negative terminal first, then the
positive.
When work is complete:
•
connect the positive terminal first, then the
negative.
Read and pay attention to the ‘Electrical system’
section.
CHOOSING OILS / LUBRICANTS
Only use the recommended grades, select
viscosities according to temperature level.
FILTERS
Replace all filter elements and cartridges at the
specified intervals.
All filters are carefully selected to suit the equipment
concerned. Trouble-free operation and long service
life for the engine and hydraulic assemblies can only
be ensured by using original replacement parts.
SEALS
When removing components, pay attention to their
seals.
Before installing, check the seals and replace them
even if only slightly damaged.
Check that they are correctly seated when
assembling.
CHECK OIL LEVEL / OIL CHANGE
Place the machine horizontally. Change the oil when
the machine is warm. Warm oil flows better and
carries particles in suspension better (oil carbon and
abrasion particles).
GREASE LUBRICATION
Clean the lubricating nipples, then lubricate as
indicated in the lubrication plan.
AFTER MAINTENANCE
To prevent corrosion damage, coat all bare metal
machine parts with a film of grease.
When the work is completed, re-attach all safety
devices.
Only start the drive motor when no one is working on
the machine.
Carry out a function test on the machine.