F156.6 / F156.6A
SAFETY INSTRUCTIONS
0 - 1
Carefully read personal and machine SAFETY INSTRUCTIONS (at the beginning of this manual)
FUNDAMENTAL SAFETY INSTRUCTIONS
WARNINGS AND SYMBOLS
The following signs are used in the manual to desig-
nate instructions of particular importance:
DESIGNATED USE
The machine has been built with state of the art tech-
nology and in accordance with the officially recog-
nised safety regulations. Nevertheless, its use may
constitute a risk to life and limb for the operator or
third parties, or cause damage to the the machine
and other property.
The machine must be used only in technically perfect
condition in accordance with its designated use and
the instructions set out in the operating manual, and
only by safety-conscious persons who are fully aware
of the risks involved in operating the machine. Im-
portant notices are to be found at the beginning of
the chapters. Functional disorders should be rectified
immediately, especially those which could affect
safety conditions.
The grader is intended mainly for:
- Creating fine-graded surfaces;
- Clearing away top soil;
- Tearing up old road surfaces and hard ground;
- Cutting slopes;
- Clearing away ice and snow;
- Gathering, spreading, mixing and compacting ma-
terials.
Precautionary rules and measures
designed to protect the machine op-
erator and other persons from life-
threatening danger or injuries and to
prevent extensive damage.
Information and precautionary
measures designed to prevent
damage to the machine or other
property.
The grader can also be used with other working
equipment for special purposes. The technical data
offer clear instructions in this respect.
Designated use includes following the operating in-
structions and fullfilling the inspection and mainte-
nance conditions.
The manufacturer/supplier cannot be held liable for
any damage arising out of improper use. The risk
involved in improper use lies entirely with the user.
Noise emission specification in accordance with the
3
rd
Ordinance of the Machine Safety Act (18/01/
1991) and EC Machine Directive, 89/392/EEC.
If the earth-moving mchine is operated in accordance
with its designated use, the installation of driver’s
seats complying with ISO 7096 ensures that the con-
sidered vibration accelerations azw (measured as
per ISO 2631, Part 1) fulfil the requirements of pro-
tecting the driver against wholebody vibration.
Using the machine for purposes
other than or extending beyond
those stated above, e.g.:
- for the transportation of persons;
- as a working platform;
- for pulling or transporting loads
without the working equipment
being approved for such purposes
is considered contrary to the desig-
nated use.
Improper use may involve a lifeth-
reatening risk for operators or other
personnel or may cause injury or ex-
tensive damage.
Find manuals at https://best-manuals.com