New Holland EH35, Руководство по обслуживанию

Страница: 25 / 41

02
-1-8
5. TRANSPORTATION
(1) LOADING MACHINE ON A TRAILER
1) Keep trailer bed clean.Put chocks against truck
wheels.
2) Use a ramp or loading dock. Ramps must be
strong enough, have a low angle, and correct
height. Load and unload machine on a level sur-
face.
3) Travel machine onto ramps slowly. Center the
machine over the trailer.
4) Lower all attachment.
5) Stop engine. Remove key from switch.
Do not put chains over or against hydraulic lines
or hoses.
6) Fasten machine to trailer with chains or cables.
During transportation, the bucket or attachments
may hit the canopy or the cab. Therefore, set the
machine in the transporting position by observ-
ing following points:
1. Extend the bucket cylinder fully.
2. Extend the arm cylinder fully.
3. Lower the boom.
4. If machine cannot be transported with arm cylin-
der fully extended, remove bucket or attachment
and extend arm cylinder.