New Holland E485C, Руководство по обслуживанию

Страница: 12 / 31

GENERAL
E485C
W5-1-8
3. Precautions for electric system
(1) Removal of battery cable
a. In an electric system, remove the cable from the battery
minus (-) terminal to prevent burnout due to short -
circuit.
b. When the battery cable is removed, the battery terminal
may be damaged. Loosen the nut completely and never
pry it for removal.
c. If you remove the nut, always re-tighten the nut by
10N
⋅
m {102kgf
⋅
cm, 7lbf
⋅
ft}.
(2) Handling of electronic parts
a. Do not give impact on electronic parts such as
computer and relay.
b. Do not place electronic parts at a high temperature and
humidity area.
c. Do not expose electronic parts to water in washing of a
vehicle.
(3) Handling of wire harness
a. Mark clamps and clips to prevent interference of a wire
harness with body edge, sharp edge and bolts. Be sure
to reassemble it to the original position.
b. When parts are assembled, be careful not to pinch a
wire harness.
Loosen
SAPH30ZDE0100002
SAPH30ZDE0100003
SAPH30ZDE0100004