New Holland D125 LGP Скачать руководство пользователя страница 47 | Manualshive

Страница: 47 / 51

New Holland D125 LGP Скачать руководство пользователя страница 47

INTRODUCTION

RTV Sealants

Product

Color

Strength

Fixture/Full

Cure (Steel/

Steel) Time

Description

595

Clear

1.5 MPa

(

218 psi

)

5 min/24 hrs

Is designed for superior bonding and sealing properties
to most surfaces (not recommended for concrete). This
product resists aging, weathering and thermal cycling
without hardening, shrinking or cracking. It is formulated
to withstand extreme temperature cycling, UV light and
ozone. The thixotropic nature reduces the migration of
liquid product after application to the substrate.

596

Red

NA

5 min/24 hrs

Is specifically formulated for gasketing and sealing where
high temperatures

315 °C

(

600 °F

) are experienced such

as exhaust manifolds - crossovers, high temperature
ovens and furnaces. Applications where sealing and
bonding are required under frequent exposure to
temperatures above

235 - 315 °C

(

450 - 600 °F

).

Gasket Sealants

Prod-

uct

Color

Strength

Fixture/Full

Cure (Steel/

Steel) Time

Recom-

mended

Primer or

Activator

Description

509

Blue to
green-
ish
paste

8 - 9 MPa

(

1160

- 1305 psi

)

1 hr/72 hrs

7471 or
7469

Provides resistance to low pressures immediately
after assembly of flanges. It seals close fitting joints
between rigid metal faces and flanges. Typically
used as a form-in-place gasket on rigid flanged
connections, e.g. gearbox and engine casings, etc.
The thixotropic nature reduces the migration of
liquid product after application to the substrate.

515

Opaq-
ue, dark
purple

6 - 14 MPa

(

870

- 2031 psi

)

30 min/18 hrs

7471 or
7469

It seals close fitting joints between rigid metal
faces and flanges and will flex with minor flange
movements. Provides resistance to low pressures
immediately after assembly of flanges. Typically
used as a form-in-place gasket for pumps,
thermostats, compressors, transmission housings
and axle covers.

518

Red

7.5 - 8.5 MPa

(

1088 -

1233 psi

)

30 min/8 hrs

7471 or
7469

Typical applications include sealing close fitting
joints between rigid metal faces and flanges.
Provides resistance to low pressures immediately
after assembly of flanges. Typically used as a
form-in-place gasket on rigid flanged connections,
e.g. gearbox and engine casings, etc.

542

Brown

9 - 25 Nm

(

80 -

222 lb in

)

20 min/8 hrs

7471 or
7469

Is designed for the locking and sealing of metal
pipes and fittings. The product cures when confined
in the absence of air between close fitting metal
surfaces and prevents loosening and leakage from
shock and vibration.

545

Purple

2 Nm

(

20 lb in

) 30 min/24 hrs

7471 or
7469

Is designed for the locking and sealing of metal
pipes and fittings. The product cures when confined
in the absence of air between close fitting metal
surfaces and prevents loosening and leakage
from shock and vibration. This product is specially
formulated to offer lubricity for easy assembly.

567

Off
white

0.3 - 1.7 Nm

(

3

- 15 lb in

)

4 hrs/72 hrs

7471 or
7469

Is designed for the locking and sealing of metal
tapered threads and fittings.

569

Brown

1.1 - 2.8 Nm

(

10 - 25 lb in

)

2 hr/24 hrs

7471 or
7469

Is designed for the locking and sealing of plastic
and metal pipes and fittings.

47907874 06/10/2015

40

«
...
45
46
47
48
49
...
»

Содержание D125 LGP




















































Отзывы:

Нет отзывов