4-17
−
The default gateway address and the IPv4 address specified in the
IPv4 settings
area
must reside on the same network segment.
−
The
IPv6 settings
area is not available.
{
For the VMware ESXi operating system:
−
The default gateway address and the IPv4 address specified in the
IPv4 settings
area
must reside on the same network segment.
−
The
Static
option in the
IPv6 settings
area is not available. The IPv6 address obtaining
method can only be DHCP.
{
For the Ubuntu Server operating system:
−
The default gateway address and the IPv4 address specified in the
IPv4 settings
area
must reside on the same network segment.
−
If you select
Static
in the IPv4 settings area, the
IPv6 settings
area becomes
unavailable. If you select
Static
in the IPv6 settings area, the
IPv4 settings
area
becomes unavailable.
•
Key
—This parameter is available only when a Windows operating system is to be installed.
Enter the key required for operating system installation.
•
Target
controller
—Select the storage controller where the operating system is to be installed.
This parameter is available only when the server has multiple storage controllers installed.
•
Target
drive
—Select the drive where the operating system is to be installed.
•
Primary partition capacity
—This parameter is available only when a Windows operating
system is to be installed. Specify the capacity of the primary partition. A minimum capacity of 50
GB is required for operating system installation. When the server has a large physical memory,
set the primary partition capacity to the maximum value as a best practice.
If a Linux operating system is to be installed, the maximum capacity of the target drive is used
as the primary partition capacity by default and cannot be changed. The minimum primary
partition capacity required for Linux operating system installation is 80 GB.
Verifying the configuration
Procedure
1.
On the
Verify configuration
page, verify that the operating system installation settings are
correct.
