2
www.edenarbors.com
1
Lay out the top rail
,
b
ottom rail
,
horizontal spindles
,
and
vertical spindles as shown. Start
b
y inserting the 7 vertical
spindles into the 3 horizontal rails.
Note
that the routed holes on the horizontal rails are slightly
offset from the centre. Ensure that the holes are aligned as per
the inset image.
Continue to inser
ttheassembly
into the top and
b
ottom
rails.
Ensure that the vertical spindle notched end
s
are fully inserted
into the top/bottom rails, just past the notched end
s
.
Note
the difference
b
etween the two rails. The
b
ottom rail
only
has one routed side whereas the top rail has additional
holes
for the arch spindles.
Align and insert the rails into one of the post.
Note
that the pre-drilled holes are located on t
he ba
ck side
of the trellis.
Proceed with the other post.
Flip the trellis over and using the provided screws
,
fasten
the posts to the top and
b
ottom rails in place as shown.
1
2
3
4
STEP ONE
2
3
NOTE: Assembly will be easier if performed by two people
Note orientation
5
5
The Vienna Trellis
