2
Determine the location of the post and excavate a 36” (91 cm) Deep x
8” (20 cm) Diameter hole.
Insert the wooden post and set the post in place using a bag of concrete.
While the concrete is still wet, make sure the wooden post is plumb in
both directions and support it in position until the concrete hardens.
Fill within 2“ (5 cm) of ground level as shown.
Tip: To allow water runoff, slope the concrete away from the post
as shown.
Backfill the remaining hole with previously excavated dirt.
The wooden post should stick out 60” (152 cm).
Wood Post Installation
1
2
3
STEP O N E
www.newenglandarbors.com
www.newenglandarbors.co.uk
1
Round Lamp Post Instructions
36 in (91 cm)
Ø8 in (20 cm)
60 in (152 cm)
3
2
2 in (5 cm)
Sloped
Concrete
