Page 9
CLEANING AND MAINTENANCE
BE SURE THAT THE UNIT IS DISCONNECTED FROM THE POWER OUTLET
WHEN PERFORMING CLEANING
Drain the remaining water in the tank and clean the tank after every use.
How to de-calcify the Water Tank interior
To clean calcium deposits that build up inside the Water Tank, add one or two tablespoons of white
vinegar to a full Water Tank close the Water Tank Cap and then shake the contents. DO NOT TURN THE
STEAMER ON.
Cleaning procedure to remove lime scale
If your steam mop begins to produce steam more slowly than usual or stops producing steam, you may
need to remove lime scale. Lime scale can develop over time on the metal parts and greatly affect mop
performance.
It is necessary to remove lime scale on a regular basis every 25-50 times you use a full tank of water or at
least once a month, especially in areas with hard water.
The frequency of lime scale removal depends upon the hardness of your tap water and how often you use
the steam mop.
By using cleaning solution
1.
Prepare a solution of 1/3 white vinegar and 2/3 tap water and add to the water tank.
2.
Secure and position the unit to ensure steam released is aimed away from the floor or surrounding
objects and surface. Plug the unit in, turn the unit ON by pressing the power switch, and allow the unit to
produce steam unit the vinegar/water solution is used up.
3.
Repeat the above procedure as many times as necessary until a normal steam flow rate is achieved.
4.
Fill the water tank with fresh water and rinse out.
5.
Fill the water tank with fresh water, attach to the unit and release steam through the system until the
water tank is empty.
WARNING: Don't leave the steamer unattended during the lime
scale removal process or while in use.
NOTICE:
Perform a test cleaning on a suitable isolated area after each lime scale removal to ensure that
there is no debris left in the system.
This product contains no serviceable parts. Do not try to repair it yourself. Any servicing that requires
disassembly other than cleaning must be performed by a qualified appliance repair technician.
ALL servicing should be done by an authorized service representative.
CLEANING MICROFIBER PAD
● Machine washable on “warm” setting. Always use a mild detergent.
● For best care results, lay flat to dry.
● IMPORTANT:
Allow the steamer to fully cool down before performing any maintenance or trouble
shooting checks.
●
IMPORTANT:
Never use bleach or fabric softener when washing the microfiber cleaning pad.
