Page 7
● Push the release button 8 down and pull the hand held
steam cleaner B away from the steam mop body C.
(Fig.11)
● First attach the Direct Steam Nozzle onto the Hand Held
Steam Cleaner until it clicks into place.
(Fig.12)
● Plug in the appliance to a grounded outlet, Main body
indicator light will flash.
● Press main body on/off switch 12, indicator light will glow
red, after 25 seconds, indicator light will change to blue.
To change modes, press the STEAM CONTROL button to
select either DUST, MOP or SCRUB mode. You can change
the steam mode while the hand held steam cleaner is in
standby or in use. Hold down the steam trigger to start
steaming.
(Fig.13)
CAUTION:
Do not press the steam trigger until the Direct
Steam Nozzle is snapped into the main
nozzle of your Hand Held Steam Cleaner.
● To remove the Direct Steam Nozzle, press and hold down
the Release Buttons. Then slide out the Accessory Hose
using the grip.
(Fig.14)
NOTE:
The Hand Held Steam Cleaner may continue to
emit steam for a few seconds after the trigger is released.
This is normal, and the steaming will eventually come to a
stop.
Using Your Removable Hand Held Steam Cleaner with
Accessory Hose
● To use the Accessory Hose, First attach the Accessory
Hose to the Hand Held Steam Cleaner until it clicks into
place.
(Fig.15)
● Select the desired cleaning tool for use. Follow the clean
-
ing tool sub-assembly instructions for the selected tool.
● To remove the Accessory Hose, press and hold down the
Release Buttons. Then slide out the Accessory Hose using
the grip.
CAUTION: Do not press the steam trigger while attaching or removing the Accessory Hose.
CAUTION: Do not use the Accessory Hose without cleaning tools attached.
USE AS A HANDHELD STEAM CLEANER
