- 43 -
6. Pull forward and hold the latches at both sides and connect the main unit by sliding it onto the
rails of the base unit.
7. Push the
base unit’s latches back into place so that the white lines are visible, indicating the
latches have been locked
.
Ensure that the latches are in the fully locked position (white lines visible). Normal
detection is not possible if latches are not fully locked.
Dispose of used sensor/sampling units in accordance with applicable local laws
and regulations.
NOTE
Push the latch (lock position).
White line
Latch
Rail
(2) Align with the rail and slide on.
(1) Pull forward and hold the latches at both sides.
