5
Photo Labs & Salons
Day Care Centers
Chemical
Odors
Bowling Alleys & Parlors
INSTALLATION
1. Remove unit from shipping carton.
2. Remove all protective materials.
3. Read Owner’s Manual thoroughly prior to installation.
4. Fully insert cord into the power cord receptacle on the back of the unit.
5. Install Ozone and Filters as shown in the steps below.
Installing Ozone Plates and Filters:
Step 1:
Make sure the unit is unplugged before
installing or removing any filters or maintaining
the unit in any way to prevent electric shock.
Step 2:
Push two latches down on back cover.
Step 3:
Remove HEPA filter and all other filters
by pulling out the white ribbon on the top.
Step 4:
Insert the 2 Ozone plates found in the
small brown box. For maximum performance,
Ozone plates may need to be washed in warm
water. Always allow them to properly dry before
installing.
Step 5:
Reinstall all filters in the same order
they were removed and reattach back cover.
