32
REFLEXOTHERAPY
Device
MAINTENANCE
• Please disconnect the cable from the plug after use.
• Check the device is disconnected prior to cleaning.
• Any oil stains should be cleaned using a cloth and cleaning material.
• Do not clean the switch and the remote control with a damp cloth, as this
may result in irreversible mechanical failure.
• Do not clean the device with brushes or hard materials which might damage
the same.
TIPS
• To ensure the device operates correctly the user should pace both bare feet,
with no socks, on the base of the device; otherwise it will not work.
• If your device does not work after being turned on, check it is properly
connected, check the cable connecting the device to the plug and turn the
device on and off once again.
• If it stops suddenly, check the time has not elapsed and restart the
reflexotherapy device.
• Do not use the reflexotherapy device for more than 25 minutes a day.
• The use of electrodes is intended to activate the muscles of the arms, legs,
back and abdomen. Do not use them on any other areas of the body not
specified in this manual. Specific programmes exist for the treatment of the
rest of the body using reflexotherapy (placing the bare feet on the device) or
the belt accessory.
TECHNICAL SPECIFICATIONS
• Model: Reflexotherapy Device
• Measurements: 45 x 44 x 15 cm.
• Voltage: AC100-240V – 50/60 Hz
• Power: 5W
• Recommended time of use: 25 minutes per day
