NEW BRUNSWICK SCIENTIFIC Innova 4300, Руководство по эксплуатации

Страница: 29 / 61

17
New Brunswick Scientific User’s Guide
4
4
O
O
P
P
E
E
R
R
A
A
T
T
I
I
O
O
N
N
4.1 Starting the Innova 4300
To initially start the instrument, push the ON/OFF switch on the right side of the
shaker to the ON position.
NOTE:
The LED display will flash to indicate that the shaker has been off or the
power to the shaker has been interrupted. To stop the flashing display,
press any key.
Press the SELECT key until the RPM indicator lights. If the shaker is running, the
LED display will track the speed as it accelerates to the last entered setpoint.
The shaking action may be stopped or started by pressing the
START/STOP key.
The shaker motor stops when the cover is opened. While the cover is open and the
display mode is RPM, the display will read “Lid”.
At the higher speed ranges, it is recommended that the platforms have a 30%
minimum load to maintain a good balance condition.
4.2 Continuous (Unlimited) Run
To set up a continuous run:
1. If the LED displays “Off”, press the
START/STOP key.
2. Press SELECT until RPM is lit.
3. Press either
∆
or
∇
to enter SET mode (set indicator will light).
4. Set the speed by using the
∆
or
∇
key until the desired setpoint is displayed.
NOTE:
Holding the
∆
or
∇
key down will cause the setting to change more
rapidly.