LED backlight - animation styles and colors
LED backlight on/off: with MENU button (10) on the speaker panel, longer press. power
button (1) on the remote control, by short pressing the button.
LED Backlight Color Selection: Color selection or automatic color change. by briefly
pressing the button (14) on the speaker panel, briefly pressing the LED button (6) on the
remote control, the speaker screen will display the numbers of consecutive colors or the
information "Auto". C01 / C02 / C03 / C04 / C05 / C06 / Auto Selecting the style of LED
backlight animation: by pressing the button (14) on the speaker panel for a longer time,
pressing the LED button (6) on the remote control on the speaker screen will display the
numbers of subsequent animation styles LEd1 / LEd2 / LEd3 / LEd4 / LEd5 / LEd6 / LEd7
MICROPHONE
Once the microphone is connected, you can speak or sing into the microphone using the
volume gain through the speaker and speak or sing simultaneously with music or other
sound played by the speaker from any source, e.g. Bluetooth, USB, memory card, external
audio device in LINE IN mode or from the radio. Connect the microphone to one of the
MIC 1 or MIC 2 input jacks. Turn on the microphone with the switch on the microphone
(On/Off). Adjust the signal level from the microphone. Set the ECHO effect level.
Do not use the microphone too close and do not point the microphone head directly towards
the speaker from a short distance - this may cause noise and interference due to
interference.
Charging the battery.
The device has a built-in rechargeable battery. After purchasing the device, you need to
fully charge the battery. Set the power switch (2) to OFF. Connect the DC9V AC adapter
(supplied) to the AC230V AC outlet, then the AC adapter cable to the DC9V speaker
charging socket (1). When charging, the LED on the speaker panel will glow red, when
fully charged, it will turn green. The speaker's battery life on a fully charged battery
depends on usage and volume. Increasing the volume of the voice means increasing
power consumption and reducing the working time of the device on a fully charged battery.
Sound disturbances, interruptions and a decrease in dynamics and sound power most often
mean that the battery is discharged. In this case, the battery must be fully charged. Storing
and using equipment at low temperatures causes a decrease in performance and
accelerated discharge and battery wear. The battery should be regularly fully charged
depending on the intensity of use, regularly recharged also during prolonged non-use of the
equipment, and do not allow the battery to be completely discharged. Detailed instructions
for safe use of the battery can be found later in the manual.
Use the battery at temperatures from + 5°C to + 35°C. Never expose the battery to
high temperatures above: 40°C - there is a risk of explosion. Battery life depends on
