The speaker can work with two microphones (MIC1, MIC2) or, for example, with one
microphone and another musical instrument with a signal output Large Stereo Jack 6.3mm
with electrical parameters such as microphone signal, e.g. electric guitar, keyboard, etc.
The microphone must be connected to the MIC 1 input jack. A second microphone or
musical instrument should be connected to the MIC2 input jack.
Playback from a USB stick or from an TF memory card (microSD).
When you insert an external USB memory or TF card (microSD) into the corresponding
reader, the device automatically switches to the playback mode from the storage device
(USB or TF card) and starts playback if there are files on the external memory.
Playback control - using the PLAY/PAUSE buttons, fast-forward, rewind.
Radio FM
After selecting the FM radio mode, in order to search for and remember radio stations, (auto
scan) briefly press the PLAY button. The device will automatically search for and remember
all available radio stations in the FM band. During the search, the LED screen will display
the tuning frequency and subsequent channels under which the next searched radio
stations (P01, P02, P03., etc.) will be saved. When the search is complete, the speaker will
set itself to receive the first radio station found. Switching subsequent radio stations -
using the forward >> / undo buttons << on the front panel of the device or on the remote
control, by short pressing the button. Longer press of the scroll button - searching the
radio band to the next station down or up the scale (scanning).
TWS function - two speakers combined in one set
If a second speaker of the same type is available, the TWS (True Wireless Stereo) function
allows you to wirelessly combine two speakers of the same type into one set for more
powerful stereo sound.
1. Before connecting TWS, make sure that the Bluetooth function has been disabled on the
smartphone to be paired with the speaker.
2. Turn on both speakers and use the MODE button to select the Bluetooth function (the
screen will display the message "blue" on each speaker.
3. Press and hold the Play/Pause/TWS button (13) on the panel of one of the speakers for
about 2 seconds until a flashing "SLAV" message appears on the screen.
When the "SLAV" message stops flashing, it means that the speakers have merged into a
TWS pair. On the screen of the first speaker will be displayed the message "blue", on the
screen of the second speaker - the message "SLAV".
4. Turn on the Bluetooth function on your smartphone, then search for and pair the RM
1600 BT speaker.
Paired and connected in a TWS system, the speakers will play the same stereo sound from
a Bluetooth smartphone. When you turn both speakers back on, the speakers will
automatically pair up into TWS.
