Nevir NVR-7027TDTG-16N, Инструкция по эксплуатации

Страница: 59 / 85

4
4.1 Setting up your PC software(based on Windows XP)
PC setting
The Windows display-settings for a typical computer are shown below.But the actual screen
on your PC will probably be different,depending upon your particular version of Windows and
your particular video card.But even if your actual screen look different, the same,basic set-
up informaiton will apply in almost all cases.
1. First,click on “Control Panel” on the Windows start
menu.
2 .When the control panel window appears,click on
“Appearance and Themes” and a display dialog-box
will appear.
3 .When the control panel window appears,click on
“Display” and a display dialog-box will appear.
4. Navigate to the “Settings” tab on the display dialog-
box.
If a vertical-frequency option exists on your display
settings dialog box,the correct value is “60Hz”,
Otherwise,just click”Enter”and exit the dialog box.
4.2 Display Mode
If the signal from the system equals the standard signal mode,the screen is adusted
automatically.If the signal from the system does not equal the standard signal mode,adjust
the mode by referring to your videocard user guide;otherwise there may be no video.For the
display modes listed below,the Screen image has been optimized by manufacturer.
Resolution Vertical Frequency(Hz) Mode
640x480
800x600
1024x768
1280x1024
1366x768
1440x900
60 Hz
60 Hz
60 Hz
60 Hz
VGA
SVGA
XGA
SXGA
16
60Hz WXGA
Ro H
S
60Hz
WXGA+