ENG-8
CD/MP3 PLAYER OPERATION
This CD player plays Audio Discs including CD-R, CD-RW, MP3 and USB files. CD ROMs, CD-I, CDV, VCD,
DVD or computer CDs are not possible for playback on this set.
Note: Even if this portable radio-CD player is able to read CD-R and CD-RW discs, in addition to
conventional compact discs, it is not possible to offer a 100% guarantee that all CD-R/RW discs can be
read; playback depends on the quality and condition of the blank discs that you use, among other things. A
playback failure does not necessarily indicate that the unit is malfunctioning.
IMPORTANT: CDs encoded with copyright protection technologies by some record companies may be
unplayable by this product.
1. Adjust
FUNCTION SELECTOR
to
CD/MP3/USB
.
2. To open the CD door, raise it by the corner marked OPEN/CLOSE.
3. Insert a CD with the printed side facing up and press the CD door gently to close.
(Display shows - – and later the total number of tracks)
4. Start playback by pressing
PLAY/PAUSE
.
5. Press
PLAY/PAUSE
to interrupt or resume playback.
6. To stop CD playback, press
STOP
.
NOTE: CD playback stops automatically when:
the CD compartment is opened;
the RADIO function is selected;
the CD is finished.
SELECTING A DIFFERENT TRACK
Press
NEXT
or
BACK
once or repeatedly until the desired track number appears in the display.
In the stop/pause position, press PLAY/PAUSE to start playback.
SELECTING A DIFFERENT FOLDER
Press
FOLDER UP
for 2 seconds. When the display unit flashes, press
NEXT
or
BACK
to select the
desired folder.
To select the previous files, press
FOLDER DOWN
.
(Comment: the FOLDER UP/DOWN function can only be activated if the disc contains at least 2 files)
SEARCHING FOR A PASSAGE ON A TRACK
1. During playback, press and hold down BACK or NEXT. (The CD is played at high speed and low volume.)
2. When you recognize the passage you want release BACK or NEXT. (Normal playback resumes.)
NOTE: When your searching reaches the end of the last track, the CD goes to stop mode.
MODE
Repeat: playback of the current track continuously.
Repeat all: playback of the entire CD continuously.
Album: playback of selected folder continuously.
Random: playback in random order continuously
PROGRAMMING OF TRACK NUMBERS
PROGRAM CHECK
In
STOP
mode, press the
PROG
repeatedly to see your stored track numbers.
DELETING A PROGRAM
Perform the following operations to delete the memory:
open the CD door;
select the RADIO source;
press STOP once.
You may store up to 20 tracks
(
in
CD
mode
)
or
99
tracks
(
in
MP3
/
USB
mode
)
the desired sequence. If
you like, store any track more than once.
1. In
STOP
mode, press
PROG
to activate programming. (Display:
PROG
and “
P01
” flash.)
2. Press
BACK
or
NEXT
to select your desired track. (Display:
PROG
and your desired track number flash.)
3. Press
PROG
to store the desired track number. (Display:
PROG
and “
P01
” flash for you to program the
next track.)
4. Repeat stop 2 to 3 to select and store all desired tracks in this way.
5. To play your program, press
PLAY/PAUSE
. (Display:
PROG
flash during program playback.)
NOTE: If you try to store more than 20 tracks, no track can be selected and the display will show flashing CD
FUL
or
MP3
/
USB
FUL.
ENG-9
USE WITH USB DRIVE
MP3
MP3
USB
1. Slide the FUNCTION SELECTOR to CD/MP3/USB.
2. Insert your USB drive into the USB jack.
3. Press and hold PLAY/PAUSE for 2 seconds to switch from CD/MP3 mode to USB mode.
The display unit shows:
4. Start playback by pressing PLAY/PAUSE.
5. To stop playback, press STOP.
Press PLAY/PAUSE again for 2 seconds to return to CD/MP3 mode.
The display unit shows:
NOTE: Before removing your USB drive, press STOP then press and hold PLAY/PAUSE for 2 seconds to
return to CD/MP3 mode.
USB JACK
PLAY/PAUSE BUTTON
(CD MODE)
(MP3 MODE)
(USB MODE)