88 Outboard Series / 8804 Fader pack
Issue 2.7
Overview
The 8804 fader pack is a complementary product for the 8816 Summing
Mixer (please see the separate
8816 User Manual
).
When adding an 8804 to an 8816 that was previously used in standalone
mode, it will be necessary to change jumper settings within the 8816.
Please refer to the
8816 User Manual
on how to do this.
8816 units shipped with an 8804 fader pack will be ready for use with the
8804.
On older 8816 models it may also be necessary to update the firmware,
please refer to page 14 on how to do this.
If in doubt please consult your local Neve Dealer.
8804 provides fader level control, direct outputs from each channel, mute
and solo control.
With an 8804 attached, the level control on the 8816 is re-assigned as an
Auxiliary Pre-fade Send.
Settings on the 8804 may be stored and recalled using the same Recall
software as the 8816 and other members of the Neve 88 Outboard series.
System Requirements
The 8804 may be used as a standalone unit.
If you wish to use the units Recall facility, it should be connected directly to
the computer or via a powered USB hub but
not
via a passive USB hub.
If you wish to use the Neve Recall software to store and reload user
configurations you must have one of the following supported operating
systems:
PC
:
•
Windows 2000, Service Pack 4 or later
•
Windows XP, Service Pack 3 or later
•
Vista, Service Pack 1 or later
Mac
:
•
Mac OS 10.3.9 or later
- 4 -
