23
GB
9. Transport when
travelling
9.1 Transport lock
To secure the toothbrush
6
against acciden-
tally being switched on, activate the trans-
port lock.
•
Switching on the transport lock:
Press the on/off switch
11
until the
red LED
13
flashes once.
•
If you try to switch on the toothbrush
6
with the transport lock activated, the
red LED
13
will flash.
•
Switching off the transport lock:
Press the on/off switch
11
repeated-
ly until the toothbrush
6
is switched on.
Change the mode if required by press-
ing the on/off switch
11
again.
9.2 Protective cap for the
brush head
•
Figure D:
for transport, push the pro-
tective cap
1
over the brush head
2
,
which should be dry if possible.
• If the brush head
2
has to be transport-
ed when it is still damp, remove the pro-
tective cap
1
as quickly as possible
after you have transported the tooth-
brush and allow the brush head
2
to
dry.
10. Cleaning / Hygiene
requirements
DANGER! Risk of electric
shock!
~
Before cleaning the battery charger
9
,
pull the mains plug
10
out from the
mains socket.
~
Do not immerse the toothbrush
6
and
battery charger
9
in water!
The battery charger
9
must be com-
pletely dry before you reconnect it to the
wall socket.
• To ensure the hygienic functionality of
the toothbrush heads
3
they must be
rinsed thoroughly after every use and al-
lowed to dry.
• Remove the toothbrush head
3
once per
week and clean it in hot water.
• Rinse the toothbrush
6
as well and wipe
it dry.
• Wipe the battery charger
9
with a
damp cloth if necessary, and rub it dry.
11. Storage
• Disconnect the device from the mains
and store it in a dry location.
__332855_1907_B5.book Seite 23 Dienstag, 5. November 2019 11:11 11