Nevadent 306590, Руководство по эксплуатации, Страница: 10 / 74

NZR 1.5 B2 GB
│
IE
│
NI
│ 7 ■
Power supply
♦ Use a 1 .5 V battery
7
to operate the appliance .
To insert the supplied battery
7
proceed as follows:
1) Carefully pull the housing
8
off the hand set
4
and place it to one side .
2) Insert the battery
7
. Pay attention to the polarity
markings given in the battery compartment .
3) Push the housing
8
back onto the hand set
4
until it sits
firmly in place and the gap is fully closed . The anti-slip
dimples on the housing
8
must be on the same side as
the anti-slip dimples on the hand set
4
. The writing on the
housing
8
must be on the same side as the HI button
5
and the LO button
6
.
NOTE
► If the effectiveness of the cleaning starts to decrease, the
battery
7
needs to be replaced .
Handling and use
This section provides important information about proper hand-
ling and operation of the appliance .
Fitting the cleaning attachment
1) Remove the appliance head
1
by turning it slightly so
that the dot on the appliance head
1
is aligned with the
symbol on the hand set
4
. Then pull the appliance
head
1
upwards and off .
2) Push the attachment fitting
3
into the hole of one of the
cleaning attachments
2
in the storage box
9
. You will
feel a slight click .
3) Pull the hand set
4
away from the storage box
9
. The
cleaning attachment
2
comes out of the storage box
9
.
4) Check that the cleaning attachment
2
is firmly attached
to the attachment fitting
3
. If necessary, push the cleaning
attachment
2
onto the attachment fitting
3
with slightly
more force .