
DAZD 3.7 Li B1
■
34
│
GB
│
MT
CAUTION – PROPERTY DAMAGE!
►
The electric toothbrush may only be recharged with the sup-
plied charger. The appliance could otherwise be irreparably
damaged!
►
Only operate the appliance with the original accessories
supplied.
Set-up / wall bracket
NOTE
►
The charger
may only be operated free-
standing if used in dry rooms.
►
In damp rooms, especially in the vicinity of
water (bath), the charger
must be firmly
fixed to the wall to protect it from falling into
water.
1) Press the small stand on the wall bracket
from below until this releases from the
charger
:
2) Then pull the wall bracket
downwards
from the charger
:
3) Using the screw holes of the wall bracket
,
mark the spacing for the boreholes on the
wall. Check to ensure that there is a mains
power socket in close vicinity.
4) Before drilling the holes, check to ensure that
there are no electrical cables or water pipes
behind the markings.
5) Use a 5 mm drill bit to drill the required holes
and insert the wall plugs.
6) Affix the wall bracket
using the screws
provided.
7) After you have attached the wall bracket
,
guide the power cable through the right or
left cut-out in the charger
(see magnification
on the fold-out page). Using the guide rails,
slide the charger
onto the wall bracket
.
8) Ensure that the power cable is not trapped
and that it lies properly in the cut-outs.
Содержание 275650
Страница 3: ......