To leave recording mode, flip SHAPE switch 3 twice again, or
alternatively enter playback mode directly by flipping SHAPE switch 2
twice.
Sequencer Mode: Playback
Flip the SHAPE switch of voice 2 (in the middle) twice quickly to
enter playback mode.
The voices will now play back their recorded TUNE values step by step
and the TIME settings will be updated as well with each step. The
voices will not be triggered automatically! In order to hear the
sequence, you need to put voices into drone mode by flipping their ENV
switches twice, or alternatively play them manually via the touchpads.
Only voices that had their ENV switches in position 2 during recording
will change their TUNE values, so the other ones can still be played
manually during playback.
The TIME knob controls the sequencer speed in this mode.
Exit playback mode by flipping SHAPE switch 2 twice, or alternatively,
enter recording mode directly. With some practice, you’ll be able to
use recording and playback mode on the fly without interrupting your
performance.
Firmware Update
In case there is a firmware update available, download it from here:
https://github.com/neutral-labs/elmyra
Open up your Elmyra by removing the 4 screws in the corners of the
front panel. Find the micro USB connector on the circuit board inside.
Plug a USB A to micro USB B cable, such as is commonly used for
