Front Panel
Elmyra’s front panel has 3 sections: The voices (x3), the top row and
the scratch/bite distortion circuit.
Feel free to experiment on your own, but in case you want to know
exactly which input does what, check the reference below.
Position 1 and position 2 refer to the switch positions, which are up
(1) and down (2) if you bought a complete Elmyra. For DIY projects,
these may be reversed depending on the wiring, or even left/right. It
should be easy to figure out though.
Input
Primary function
Secondary function
SHAPE
Changes the waveform for this
voice. Position 1 is “almost
sawtooth” and position 2 is “not
Enable chromatic
and sequencer modes
(see below).
