Neuton P
OWER
E
QUIPMENT
7 5 M E I G S R O A D , V E R G E N N E S , V E R M O N T 0 5 4 9 1
www.neutonpower.com
©2011 Neuton Power Equipment 286451A
Daily Checklist, Cleaning and Storing for your NEUTON Corded Blower/Vacuum
To help maintain your NEUTON Blower/Vacuum for optimum performance, we recommend you follow this checklist each time you use your
Blower/Vacuum.
Do not plug in the power cord until you have completed all of the daily checks.
[ ] INSPECT: Before plugging in the power cord, inspect for any visible damage to the Blower/Vacuum Tubes or Motor Housing. Inspect the
Air Intake and clean it to remove any debris.
Make sure the ON/OFF Switch is in the OFF (O) position.
[ ] NOISES: If you notice anything unusual, such as a vibration or odd sound, shut the Blower/Vacuum OFF immediately. Remove the power
cord and check the Blower/Vacuum for any obstructions.
If you cannot find the cause of the problem or are uncertain what to do, then have the Blower/Vacuum inspected by a qualified
repair shop before using it or visit our website at
www.neutonpower.com
.
•
Remove the power cord and allow the Blower/Vacuum to cool for at least five (5) minutes before servicing or storing.
•
If you drop the Blower/Vacuum, carefully inspect it for damage. If a Blower/Vacuum Tube(s) is broken, Motor Housing cracked, or
Handle broken or if you see any other condition that may affect the operation of the Blower/Vacuum, visit our website at
www.neutonpower.com
or call Neuton Power Equipment Toll Free at:
1-866-NEUTON1 (638-8661)
for assistance before putting it
back into use.
Cleaning the Blower/Vacuum
Use only mild soap and a damp cloth to clean the Blower/Vacuum. Never let any liquid get inside the Motor Housing and NEVER immerse
any part of the Motor Housing into a liquid.
Storing
[ ] Empty the Collector Bag before storing.
[ ] Do not store the Blower/Vacuum near chemicals, such as fertilizers, organic or other solvents. Do not expose brake fluids, gasoline,
petroleum-based products, penetrating oils, etc., to the plastic parts of the Blower/Vacuum. These products are often highly corrosive
and may cause permanent damage, weaken, or destroy the plastic to your Blower/Vacuum.
[ ] When not in use, your NEUTON Corded Blower/Vacuum should be stored indoors in a dry and high or locked-up place, out of reach of
children.
Copyrights and Trademarks
©
2011 Neuton Power Equipment, a division of Country Home Products
NEUTON and NEUTON logo are trademarks of Country Home Products
All rights reserved.
Documentation
Produced in China
for Neuton Power Equipment
