11
NEURAL DSP
// ARCHETYPE PLINI
NEURALDSP.COM
GETTING STARTED
TIME EFFECTS SECTION
DELAY PEDAL
DRY/WET KNOB
: Controls the amount of effect that is
added to the original dry input signal.
FEEDBACK KNOB
: Sets the amount of delay returned to
the input of the delay line. The higher the setting the more
repeats.
TAPE SATURATION KNOB
: This knob drives the signal to
create a subtle tape saturation effect.
TEMPO KNOB
: Adjust the BPM (Beats Per Minute).
TIME KNOB:
Sets the delay time in subdivisions. From 1/64T
to 1/1D.
TONE KNOB
: Controls the frequency range of the low pass
filter.
SYNC SWITCH
: Determines whether delay time is set
according to DAW tempo or manually.
PING PONG SWITCH:
Turn on/off the ping pong delay
effect (
Stereo, Mono to Stereo configurations only
).
MOD SWITCH:
Adds pitch modulation to the delay repeats.
STOMP ENGAGE SWITCH:
Press to activate. This will turn
on the Delay and let it process your signal.
STOMP TAP TEMPO SWITCH:
Controls the delay time by
clicking. Delay Time is set as the interval between the last
two clicks on the pad.
SCREEN:
Displaying time and subdivision values.
REVERB PEDAL
DRY/WET KNOB:
Controls the amount of effect that is
added to the original dry input signal.
SPACE KNOB:
Controls the Stereo Image of the Reverb.
TIME KNOB:
Sets the duration of the reverb decay envelope.
HP FILTER KNOB:
Controls the frequency range of the
high pass filter.
LP FILTER KNOB:
Controls the frequency range of the low
pass filter.
STOMP BYPASS SWITCH:
Press to activate. This will turn
on the Reverb and let it process your signal.
