Neunaber INSPIRE TRI-CHORUS PLUS, Руководство пользователя

Страница: 4 / 12

CONNECTIONS
We recommend that Inspire be placed after your preamp or drive pedals but
before any delay-based effects (echo, reverb). If you are using the overdrive
channel of your amplifier, the best result will be achieved by placing this effect in
the effects loop.
The POWER JACK accepts a standard (5.5 mm OD x 2.1 mm ID) center-negative
pedal power adapter (not included). The power adapter must be between 9 V and
12 V and capable of supplying at least 100 mA.
Inspire monitors the voltage from your power adapter and will notify you if:
• The voltage is too low, the LED blinks twice per second. Bypass will be enabled
to prevent any unwanted behavior due to insufficient voltage.
• The voltage is too high, the LED blinks five times per second. The voltage will be
internally limited to protect the pedal.
The FOOT SWITCH bypasses the effect. The LED lights when the effect is active.
Bypassing the effect does not turn off power to the pedal.
Inspire implements relay bypassing (i.e., “true bypass”). This is the most appropri-
ate type of bypass for this effect in most cases.
The input and output connections are independent. You may—for example—use a
mono input with stereo outputs or stereo inputs with a stereo TRS output.