Container Cleaning System TANKO®EX-R64T
Annexes
Translation - Operating/installation instructions 2020/03
77/80
Annex 1: Declaration (Translation)
Declaration of incorporation as per
EC Directive - Machinery 2006/42/EC, Annex II B
EU declaration of conformity in accordance with
EU Directive - Equipment and Protective Systems intended for use in Potentially Explosive Atmospheres
2014/34/EC
We hereby declare that the container cleaning device
Designation:
Container cleaning system
Type:
TANKO-EX-R64T
Year of manufacture: see type plate on the device
Serial number:
see type plate on the device
complies with the following basic health and safety requirements of Directive 2006/42/EC, Annex I: 1.1.2 – 1.1.7, 1.3, 1.5.2 –
1.5.9, 1.5.15, 1.5.16, 1.6, 1.7.1 – 1.7.3, 1.7.4, 1.7.4.1, 1.7.4.2, 1.7.4.3.
The specific technical documents were compiled in accordance with Directive 2006/42/EC, Annex VII B.
The supplied version of the device corresponds to the following directives and standards:
Directive/standard
Title
Version
Remarks
2006/42/EC
EC Directive - Machinery
2006
DIN EN ISO 12100
Safety of machinery - General principles for design -
Risk assessment and risk reduction
2011-03
Harmonized
standard
Correction of DIN EN ISO 12100:2011-03
2013-08
- - -
2014/34/EU
EU Directive - Equipment and Protective Systems
intended for use in Potentially Explosive
Atmospheres
2014
DIN EN 1127-1
Explosive atmospheres - Explosion prevention and
protection - Part 1: Basic concepts and methodology
2011-10
Harmonized
standard
DIN EN ISO
80079-36
Explosive atmospheres - Part 36: Non-electrical
devices for use in potentially explosive atmospheres -
Basics and requirements
2016-12
Harmonized
standard
DIN EN ISO
80079-37
Explosive atmospheres - Part 37: Non-electrical
devices for use in potentially explosive atmospheres -
Protection through constructional safety “c”, ignition
source monitoring “b”, fluid encapsulation “k”
2016-12
Harmonized
standard
Designation in accordance with Directive 2014/34/EC:
II 1 G Ex h IIB T6 Ga
II 1 D Ex h IIIC T60 °C Da
TPS 20 ATEX 055073 0009 X
EC-type examination certificate TPS 20 ATEX 055073 0009 X of the designated body TÜV SÜD Product Service GmbH,
certification body, identification number 0123, Ridlerstrasse 65, 80339 Munich, Germany.
Quality assurance system according to DIN EN ISO/IEC 80079-34, certified by the designated body TÜV NORD CERT GmbH,
identification number 0044, Langemarckstrasse 20, 45141 Essen, Germany.
Armaturenwerk Hötensleben GmbH
Schulstrasse 5 - 6
D-39393 Hötensleben, Germany
Telephone: + 49 (0) 39405 92-0
Fax:
+ 49 (0) 39405 92-111
E-mail:
Homepage: http://www.awh.eu
0044
