NEULOG DROP COUNTER LOGGER SENSOR GUIDE
Materials needed to configure your offline experiment:
USB-200 Module, WIFI-201 module or VIEW-101 Module
USB to mini USB cable (included with the USB-200 module)
Procedure:
1.
To determine the experiment settings, first connect to your chosen device (PC,
Mac, tablet, smart device) and click on the “Off-line experiment” icon after the
sensor search has ended. (For more information on how to change the
experiment settings, view the quick start procedure section for your chosen
device in this document.)
2.
Connect the drop counter sensor directly to the left side of a charged BAT-200
module.
3.
When ready to collect data press the “Start/Stop” button on the drop counter
sensor; a red light will turn on for the duration of the experiment.
4.
After the experiment has concluded (the “Start/Stop” button is pressed again or
the data collection period ends) connect the sensor to your chosen device (you
can find full instructions in each device’s quick start procedure section).
5.
Open NeuLog application.
6.
Click the “Off-line experiment” icon.
7.
Click the “Load data from sensors” icon.
8.
Select which experimental data to upload (5 experimental runs can be stored at
one time on the NUL-223 drop counter sensor).
Restoring sensor’s factory default settings:
Procedure:
1.
Connect the USB-200 to a PC, Mac, tablet, or smart device.
2.
Connect the drop counter sensor to a USB-200 module (they directly plug
together).
3.
Open the NeuLog application.
4.
Click the “Tools” icon.
5.
Click “Restore sensor’s factory defaults” on the menu.
Included with the sensor:
NeuLog NUL-223 Drop Counter Sensor Guide (this document)
Durable plastic drop counter probe attached directly to the sensor's body by a
rubber-coated wire
Threaded rod for easy connection to retort stands or other labware
Sensor's specifications
Drops
Drop Counter
signal
Range and
operation modes
0 to 6,500 drops
0 to 6,500 drops X
vol. in mL
ADC resolution
Digital
Resolution
1 drop
Max Sample Rate
(S/sec)
100
Experiment Duration
: 1 second to 31 days.
Sensor's features:
Fully digital data
Rugged plastic ergonomic case
Push button switch for Start/Stop experiments in off line mode
LED indicator of experiment status (blinks while collecting data)
Pre-calibrated sensing equipment
Note:
NeuLog products are intended for educational use
Videos and experiment examples:
Videos, literature and other probes can be found at
In order to access the drop counter sensor's page, choose "Products" on the
main menu and then "Drop counter logger sensor".
In order to find the science experiments, choose "Experiments" on the main
menu of the NeuLog website, then choose "Physics", "Chemistry", "Biology" or
"Environmental Science".
Chemistry Experiment:
o
Titration of a Strong Acid and a Strong Base (C-10)