NEULOG VOLTAGE LOGGER SENSOR GUIDE
Restoring sensor’s factory default settings:
Procedure:
1.
Connect the USB-200 module to a PC, Mac, tablet, or smart device.
2.
Connect the voltage sensor to a USB-200 module (they directly plug together).
3.
Open the NeuLog application.
4.
Click the “Tools” icon.
5.
Click “Restore sensor’s factory defaults” on the menu.
Included with the sensor:
NeuLog NUL-201 Voltage Sensor Guide (this document)
Red (positive probe) and black (negative probe) wires with 4 mm plugs connected
directly to the sensor's body
Sensor's specifications
Range and operation
modes
±20 V
ADC resolution
15 bit
Accuracy
1%
Resolution
0.01 V
Max sample rate (S/sec)
3000
Experiment Duration
: 50 milliseconds to 31 days.
Sensor's features:
Fully digital data
Rugged plastic ergonomic case
4 mm plugs for easy connectivity
Push button switch for Start/Stop experiments in off line mode
LED indicator of experiment status (blinks while collecting data)
Pre-calibrated sensing equipment
Note:
NeuLog products are intended for educational use.
Videos and experiment examples:
Videos, literature and other probes can be found at
In order to access the voltage sensor's page, choose "Products" on the main
menu and then "Voltage logger sensor".
In order to find the science experiments, choose "Experiments" on the main
menu of the NeuLog website, then choose "Physics", "Chemistry", "Biology" or
"Environmental Science".
Physics Experiment:
o
Ohm’s Law (P-10)
Chemistry Experiment:
o
Producing Electricity (C-1)
Technical background:
The philosophy behind NeuLog’s plug and play technology is based on each sensor’s
ability to store its own data due to an internal flash memory chip and micro-controller
in each plastic NeuLog body. This technology allows the sensor to collect and then
store the digital data in the correct scientific units (
o
C,
o
F, Lux, %, ppm, for example).
The sensor is pre-calibrated at the factory. The built-in software in the logger can be
upgraded for free at any time using the provided firmware update.
The sensor is based on a very fast, high input impedance differential operational
amplifier with protected inputs.
Maintenance and storage:
Never submerge the NeuLog plastic body in any liquid.
Do not allow liquid into the voltage sensor’s body.
After use, gently wipe away any foreign material from the sensor.
Store in a box at room temperature out of direct sunlight.
