background image

Fill the rinse aid dispenser when the

indicator (D) becomes clear.

Fill the rinse aid dispenser when the

indicator (E) becomes clear.

You can turn the selector of the released

quantity (B) between position 1 (lowest

quantity) and position 4 or 6 (highest

quantity).

Daily use

1. Open the water tap.

2. Press the on/off button to activate the appliance.

Make sure that the appliance is in programme selection

mode.

• If the salt indicator is on, fill the salt container.

• Make sure that there is rinse aid in the rinse aid

dispenser.

3. Load the baskets.

4. Add the detergent.

5. Set and start the correct programme for the type of

load and the degree of soil.

Using the detergent

20

30

B

A

D

C

20

30

B

A

D

C

1. Press the release button (B) to open the lid (C).

2. Put the detergent, in powder or tablets, in the

compartment (A).

3. If the programme has a prewash phase, put a small

quantity of detergent in the compartment (D).

4. Close the lid. Make sure that the release button

locks into position.

Using the multi-tablets

When you use tablets, that contain salt and rinse aid, do

not fill the salt container and the rinse aid dispenser.
1. Adjust the water softener to the lowest level.

2. Set the rinse aid dispenser to the lowest position.

Setting and starting a programme

Starting a programme

1. Keep the appliance door ajar.

2. Press the on/off button to activate the appliance.

Make sure that the appliance is in programme

selection mode.

3. Press the programme button repeatedly until the

indicator of the programme you want to select

comes on.

4. Close the appliance door to start the programme.

Opening the door while the appliance operates

If you open the door while a programme is running, the

appliance stops. It may affect the energy consumption

and the programme duration. When you close the door,

the appliance continues from the point of interruption.

Cancelling the programme

Press and hold the programme button until the

appliance is in programme selection mode.

Make sure that there is detergent in the detergent

dispenser before you start a new programme.

End of the programme

When the programme is completed the indicator 

 is

on.
1. Press the on/off button to deactivate the appliance.

2. Close the water tap.

If you do not deactivate the appliance

within 5 minutes all indicators goes off.

This helps to decrease energy

consumption.

9

Содержание IDSH603W

















Отзывы: