background image

If the supply cord is damaged, it must be replaced by the manufacturer, its

Authorised Service Centre or similarly qualified persons in order to avoid a

hazard.

Put knives and cutlery with sharp points in the cutlery basket with the

points down or in a horizontal position.

Do not keep the appliance door open without supervision to prevent to fall

on it.

Before any maintenance operation, deactivate the appliance and

disconnect the mains plug from the socket.

Do not use high pressure water sprays and/or steam to clean the

appliance.

The ventilation openings in the base (if applicable) must not be obstructed

by a carpet.

The appliance is to be connected to the water mains using the new

supplied hose-sets. Old hose sets must not be reused.

Safety instructions

Installation

• Remove all the packaging and the transit bolts.

• Do not install or use a damaged appliance.

• Do not install or use the appliance where the

temperature is less than 0 °C.

• Follow the installation instruction supplied with the

appliance.

• Make sure that the appliance is installed below and

adjacent to safe structures.

Electrical connection

Warning! Risk of fire and electrical

shock.

• The appliance must be earthed.

• Make sure that the electrical information on the

rating plate agrees with the power supply. If not,

contact an electrician.

• Always use a correctly installed shockproof socket.

• Do not use multi-plug adapters and extension

cables.

• Make sure not to cause damage to the mains plug

and to the mains cable. Should the mains cable

need to be replaced, this must be carried out by our

Authorised Service Centre.

• Connect the mains plug to the mains socket only at

the end of the installation. Make sure that there is

access to the mains plug after the installation.

• Do not pull the mains cable to disconnect the

appliance. Always pull the mains plug.

• This appliance complies with the E.E.C. Directives.

• Only for UK and Ireland. The appliance has a 13

amp mains plug. If it is necessary to change the

fuse in the mains plug, use fuse: 13 amp ASTA (BS

1362).

Water connection

• Do not cause damage to the water hoses.

• Before connection to new pipes, pipes not used for

a long time, where repair work has been carried out

or new devices fitted (water meters, etc.), let the

water flow until it is clean and clear.

• Ensure that there are no visible water leaks during

and after the first use of the appliance.

• The water inlet hose has an external transparent

sheath. If the hose is damaged, the water in the

hose becomes dark.

• If the water inlet hose is damaged, immediately

disconnect the mains plug from the mains socket.

Contact the Authorised Service Centre to replace

the water inlet hose.

Use

• Do not sit or stand on the open door.

• Dishwasher detergents are dangerous. Obey the

safety instructions on the detergent packaging.

3

Содержание IDSH603W

















Отзывы: