Neue BIDO1SS, Руководство пользователя

Страница: 15 / 20

The oven door has 2, 3 or 4 panels of glass (de-
pends on the model)
Removing and cleaning the door glasses
1. Hold the door trim (B) on the top edge of the door
at the two sides and push inwards to release the
clip seal.
B
2. Pull the door trim to the front to remove it.
3. Hold the door glass panels on their top edge one
by one and pull them upwards out of the guide
4. Clean the door glass panels.
To install panels follow the procedure in reverse.
Insert the smaller panel first, then the larger.
Oven lamp
Warning! There is a danger of electrical shock!
Before you change the oven lamp:
• Switch off the oven.
• Remove the fuses in the fuse box or switch off the
circuit breaker.
Put a cloth on the bottom of the oven for protec-
tion of the oven light and glass cover.
Replacing the oven lamp
1. You can find the lamp glass cover at the back of
the cavity.
Turn the lamp glass cover counterclockwise to re-
move it.
2. Clean the glass cover.
3. Replace the oven lamp with applicable 300°C
heat-resistant oven lamp.
Important! Use the same oven lamp type.
4. Install the glass cover.
What to do if…
Warning! Refer to the Safety chapters.
Problem Possible cause Remedy
The oven does not heat up. The appliance is deactivated. Activate the appliance.
The oven does not heat up. The clock is not set. Set the clock.
The oven does not heat up. The necessary settings are not set. Make sure that the settings are cor-
rect.
The oven does not heat up. The fuse in the fuse box is released. Do a check of the fuse. If the fuse is
released more than one time, con-
tact a qualified electrician.
The oven lamp does not operate. The oven lamp is defective. Replace the oven lamp.
The display shows 12.00 There was a power cut. Set the clock.
Steam and condensation settle on
the food and in the oven. You left the dish in the oven for too
long. Do not keep the dishes in the oven
for longer than 15-20 minutes after
the cooking ends.
15