Neuation iFUGE M08VT Скачать руководство пользователя страница 5

11.  OPERATION

To operate the micro centrifuge, the below steps should be followed: 

1.  Connect the power adaptor & Switch 'On' from the back side. 

2.  Load  the  rotor  symmetrically  to  avoid  accidents  and  damage  to  the

centrifuge.

3. Close the lid & flip ON the back side switch to start centrifugation. 

4. Rotate* speed knob to set the speed between 1000-6000 RPM ( Display in two

digit [x 100] for conversion ) 

5. Rotate*time knobto settime from 1 to 25 & infinite min. 

6. After the rotor has stopped, press the lid release button and open the lid with 

your thumb in front and fingers on the top - simply lift the lid back on the

hinge. 

7. If you want to stop the centrifuge quickly, push the lid release button and the

rotorwill stop within a few seconds. 

In  the  following  pages  the  routine  centrifuge  operation  procedures  are 

explained in briet. 

*NOTE: 

To increase rotate knob clock wise  (  CW ) & To reduce rotate knob 

eo unter clock wise ( CCW ).

12.  WARRANTYSTATEMENT 

This product is warranted to be free from defects in material and workmanship 

for a period of two (2) years from date of purchase. Your product will be duly 

repaired upon prompt notification in compliance with the following conditions: 
This warranty is valid only if the product is used for its intended purpose and 

within the guidelines specified in this instruction manual. This warranty does not 

cover damage caused by accident, neglect, misuse, improper service, natural 

forces  or  other  causes  not  arising  from  defects  in  original  material  or 

workmanship. This warranty does not cover any incidental or  consequential 

damages, commercial loss or any other damages from the use of this product. 
The  warranty  is  invalidated  by  any  non-factory  modification,  which  will 

immediatelyterminate all liabilities on us for the products or damages caused by 

its use. The  customer shall be responsible for the product or use of products as 

weil as any supervision required for safety. If requested the products must be 

returned to the distributor in weil packed and insured manner and all shipping 

charges must be paid. 

NOTE: 

Some states do not allow Limitation on the length of implied worranties or 

the exclusion or Limitation of incidental or consequential damages.  This warranty 
gives you specific legal rights.  This warranty is given expressly in /ieu of all other 
warranties, expressed or implied. 

The purchaser agrees that there is no warranty of merchantability or of fitness for 

any  intended  purpose  and  that  there  are  no  other  remedies  or  warranties, 

expressed or implied, which extend beyond the description on the face of the 

agreement. This warranty is only applicable to the original purchaser. 

Products  received  without  proper  authorization  will  not  be  processed  for 

warranty or service. All items returned for service should be sent with postage 

prepaid in the original packaging or other suitable packaging, padded to avoid 

damage.  We  will  not  be  responsible  for  damage  incurred  by  improper 

packaging. 

NOTE: 

This warranty is valid only if the warranty  is registered with the supplier 

within 30 days from the date of purchase . 

Содержание iFUGE M08VT







Отзывы: