1. By turning the nozzle adjusting knob to get various pattern
in between horizontal oval, vertical oval, round. Users can
adjust accordingly to achieve the ideal spraying results.
2. Users can adjust the spraying size by adjusting the pattern
size control knob.
3. Combine above two steps to achieve the ideal spraying
result, as shown below.
Note: When adjusting the trigger must be released
to avoid danger!
Adjusting flow rate
The flow rate of spray can be adjusted by turning the knob
behind the trigger, clockwise turn flow rate up "+" for thick paint,
counter clockwise turn flow rate down "-" for thin paint as the
mark shown on trigger.
Spraying
The HVLP spray gun (High Volume and Low Pressure) is
a brand new spray system for users. Before first spraying,
the user must do some exercises on the discarded wood or
cardboard to conform.
Spraying
Pretreat the surface to be sprayed
The splash result depends on how smooth and clean the
surface is before spraying. Therefore, pretreat the surface
carefully and keep it dust-free. Cover non-spraying areas.
Correct spraying method
• The spray gun be perpendicular to surface when spraying.
Users can choose a distance of nozzle to surface 2-12 inches
depending on the size of the spray pattern. In general, the
longer distance, the bigger spray pattern.
• Gently press trigger by around 4mm for 1~2 second to
blow air flow first to build up pressure within the
gun. Then press trigger further to generate paint spray.
• Move the spray gun evenly parallel along the application
surface. A consistent spray gun movements result in
a consistent painting quality.
• Generally, spray twice, the first spraying may be
slightly thinner, and the second spraying should be
slightly thicker.
• At the end of spraying, hold the spray gun far from the
surface to avoid overspray.
Move the spray gun evenly
• Press and hold the trigger while spraying, and release
the trigger when spraying is finished. When spraying the
next layer, align the nozzle with the bottom edge of the
previous sprayed and allow the edges to slightly
overlap for better spray.
6
Even paint application
✔
50-300mm/2-12in
Thin layer
Thin layer
✗
Thick layer
Do not move the spray gun unevenly as shown above.
Horizontal
oval
Vertical
oval
Round
Big
Middle
Small
Содержание NSG0060-18
Страница 10: ......
