GYDA-SC
Rev.
4
The three access levels are defined as follows:
-
Observer
Read only account, can’t acknowledge alarms and re-configure modules.
-
Operator
Has access to acknowledging alarms and re-configuring modules.
-
Administrator
Access to the CONFIG tab.
The levels are
not
inclusive, so a normal user account needs both observer and
operator access. The default admin account does not have observer and
operator access for security reasons. There is no limit to the number of users.
In factory setting, all passwords are:
password
with user
names as shown in figure 16
.
Note!
Remember to change the
admin
password to prevent abuse
of GYDA
.
Note!
7.5
Icon and labels for passive modules.
Passive optical modules like: WDM, CWDM, DWM and WOC don’t contain
any microcontroller which makes them able to communicate with GYDA.
However, through GYDA it’s possible to assign a graphical icon and a label for
the module to make it visible in the GYDA user interface. The procedure is as
follows:
-
Click on the slot were the passive optical device is installed.
-
Press the
“
Tool
”
button below the frame.
-
Select the type of module from the
“
Card type
”
pull down menu.
-
If needed give the module a name in the
“
Card label
”
box.
-
Press
Apply
.
The graphical icon and the name of the module will appear when
returning to the SYSTEM tab, as shown in figure 17.
19
