GYDA-SC
Rev.
4
7
GYDA web interface
7.1
General
GYDA System Controller can control and monitor up to 79 modules, in a total
of 8 frames. Each frame must be configured with a unique frame address, set
by DIP switches at the rear of the frame, as described in Chapter 3.1 of this
manual and in the user manual for the flashlink
®
frame, FR-2RU-10-2.
Interconnection of several frames is also described in the user manual for the
frame itself, as well as in Chapter 4.1 of this manual.
There are six dif one optional views in the GYDA System Controller
web interface. Each has its own menu-tab at the top, and will be highlighted
when selected.
-
HOME (Optional, see Chapter 7.3)
-
SYSTEM (An overview of the system connected to GYDA)
-
ALARMS (All alarms within the system.)
-
LOG (All events after power up of the GYDA System Controller)
-
CONFIG (TCP/IP and SNMP Configuration Settings)
-
MANUALS (All user manuals in PDF-format)
-
ABOUT
Figure 9: The menu-tabs of the GYDA web interface.
GYDA-SC has two different pages for each module (found under the
“SYSTEM” tab).
Module Information Page
Module Configuration Page
Open user manual
Figure 10: The icons for the different views in the "System" menu.
Each of the different modules in the modular flashlink
®
range has a dedicated
icon, which will appear in the corresponding position of the frame.
The default user name and password for access to the sub menus under the
CONFIG tab is described in Chapter 7.4.
15
