network DWC-HD-DMUX, Руководство пользователя

Страница: 27 / 35

DWC-HD Rev. 2
Block Blk
#
Commands Example Response Control
physical inputs reappear at more or
less the same time, which physical
input will be chosen is unpredictable.
This again due to having one
reclocker only and having to hunt for
a valid input in the background while
the generator is still selected.
Video fallback setting cho 1 pri <k> | cho 1 pri 0 size 3 pri k , l auto
Second video change-over. This cho
is a slave of cho 0, in the sense that it
has no latch, t1, t2 or rule settings of
its own. It has a generator input that
must be set up separately and that
allows a switch to an internal video
generator. pri <k> <l> cho 1 pri 0 1
size 3 pri k , l man m
pos man <k> | cho 1 pos man 1
pos auto
0 = from cho 0
1 = from video generator, vgen 0
2 = kill
Note: manual mode is the same as
automatic mode with a priority list
with only one priority level.
Audio fallback setting cho 2-
11
pri <k> | cho 2 pri 1 size 4 pri k , l
Audio change-over blocks, one cho
per audio output from the audio
matrix, mtx 0. No other settings but
the priority list. pri <k> <l> cho 5 pri 0 2
0 = from audio matrix
1 = sine
2 = black
3 = kill
Note: Only generators (pri 1, 2 or 3)
are allowed to be set as first and only
priority.
Audio common fallback setting cho 12 pri <k> | cho 12 pri 1 size 4 pri k , l
pri <k> <l> cho 12 pri 0 2 A short-cut to set change-over’s 2-11
all at once. Will of course not report
anything in info, that's left to the
individual cho blocks.
AES output select cho 13 pos man <k> cho 13 pos man 0 size 2 man k
cho 13 pos man 1 This change over has only manual
mode and works as a simple 2:1
switch.
0: AES is selected
1: Embedded UART is selected
EDH insert select cho 14 pos man <k> cho 14 pos man 0 size 2 man k
This change over has only manual
mode and works as a simple 2:1
switch. cho 14 pos man 1
0: EDH off
1: EDH on
SDO 0 output select cho 15 pos man <k> cho 15 pos man 0 size 2 man k
cho 15 pos man 1 This change over has only manual
mode and works as a simple 2:1
switch.
0: Through mode (re-clocked only)
1: Processed mode (from FPGA)
SDO 1 output select
cho 16 pos man <k> cho 16 pos man 0 size 2 man k
This change over has only manual
mode and works as a simple 2:1 cho 16 pos man 1
network-electronics.com | 27