BROWSER-BASED GUI - JOINING PAGE
Network Video Technologies
(+1) 650.462.8100 • +44 (0) 208 977-6614
nvt.com • [email protected]
Page 17 of 25
Upon successful login, you will see the Joining page. This page allows the hub to enter Joining mode without having to depress the front-
panel Joining button. This can be particularly useful if you are at a distant camera and need access to both ends to join a new TBus
transmitter. Temporarily connect the hub to a network accessible via smartphone-based browser. For details on Joining, see page 3.
As a diagnostic tool, the Joining page of the NV-ER1808i will display a list of the MAC addreses of all joined transmitters that are found
on the TBus network. For optional easy identification, a naming description field is available. The hub will remember each entered
description associated with every transmitter MAC address. This memory is non-volatile.
TBus devices must be Joined to communicate.
Click the Join button to place the NV-ER1808i into Join mode.
Within one minute, press the Join button on a remote NV-ET180x device to make it part
of this Network.
Joined units will be added to the list below.
Rear Parking Lot Camera 5
Front Door (25 char max)
Shipping Department Doors
Edit
Enter Join Mode
TBus Status
Join
Network Video Technologies
Security Industry Leader
TBus
®
Eight Port Ethernet Receiver
Model NV-ER1808i
HW Rev A
FW rev 1.2
IP Address 192.168.254.1
Joined TBus Transceivers
74-B0-0C-01-0D-86
74-B0-0C-01-01-95
74-B0-0C-01-16-4D
Link Quality
Good
Signal Level
Fair
Signal/Noise
Poor
Bit Error Rate
Description
Figure 21 - Joining Page
Joining
Logout
Settings
Multicast
Monitor
Power
